Difference between revisions of "Image update - Dreambox 920 ultraHD"
Jump to navigation
Jump to search
(Created page with "__TOC__ == Installation via web browser == You need: * Dreambox connected to the router/AP by cable * A router/AP with active DHCP server * A browser (Internet Explorer,Micros...") |
(No difference)
|
Revision as of 12:50, 4 January 2023
Installation via web browser
You need:
- Dreambox connected to the router/AP by cable
- A router/AP with active DHCP server
- A browser (Internet Explorer,Microsoft Edge, Opera, Firefox, Safari, Chrome)
- A recent Image with extention
*.tar.xz
or a backup Image with extention*.tar.gz
Install firmware
- Bring the Dreambox in the stop mode of the Rescue Loader
- via GUI
- Menu - Standby/Restart - Recovery Mode
- via power button
- switch off the dreambox on the back - switch on the dreambox and immediately press led power button until LED blink several times red and blue and remains red
- via CLI (Command Line Interface) with Telnet or SSH
- connect to dreambox - login to your dreambox - type following command
to-the-rescue
and press enter
- connect to dreambox - login to your dreambox - type following command
- via GUI
- Access the Rescue Loader with the web browser (check on TV for the IP Adress or hostname)
- Choose Firmware upload
- Click browse to select the Image to install
- Disable the marks for Backup current settings before flashing and Restore settings after flashing
- Start the upload with Go!
- After the successful installation, click Click here to reboot to reboot the dreambox.
- Have fun with the configuration of the new image.