Image update - Dreambox ONE UltraHD

From Dream-Elite Wiki
Revision as of 16:19, 17 January 2021 by Makaveli (talk | contribs) (Created page with "== Installation via web browser == You need: * Dreambox connected to the router/AP by cable * A router/AP with active DHCP server * A browser (Internet Explorer,Microsoft Edge...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Installation via web browser

You need:

  • Dreambox connected to the router/AP by cable
  • A router/AP with active DHCP server
  • A browser (Internet Explorer,Microsoft Edge, Opera, Firefox, Safari)
  • A recent Image with extention *.tar.xz or a backup Image with extention *.tar.gz

Install firmware

  1. Bring the Dreambox in the stop mode of the Rescue Loader
    • via GUI
      • Menu - Standby/Restart - Recovery Mode
    • via power button
      • switch off the dreambox on the back and hold power button - switch on the dreambox with power button pressed until LED blink 4 times and remains red
    • via CLI (Command Line Interface) with Telnet or SSH
      • connect to dreambox - login to your dreambox - type following command to-the-rescue and press enter
  2. Access the Rescue Loader with the web browser (check on TV for the IP Adress or hostname)
  3. Choose Firmware upload
  4. Click browse to select the Image to install
    • Disable the marks for Backup current settings before flashing and Restore settings after flashing
  5. Start the upload with Go!
  6. After the successful installation, click Click here to reboot to reboot the dreambox.
  7. Have fun with the configuration of the new image.